The system shown below is made up of ten components. Components 3, 4 and 5 are not identical and at least one component of this group must be available for system success. Components 8, 9 and 10 are identical and for this particular group it is necessary that two out of the three components functions.
What is the system reliability if R1 = R3 = R5 = R7 = R9 = 0.85 and R2 = R4 = R6 = R8 = R10 = 0.95
Time flies when we're ____ ________ ___ ____ _____ __________.
_____ __________ _______ ______ ________ ______.
_____ _______.
Get Full Answer on WhatsApp
A small electronic device is designed to emit a timing signal of 200 milliseconds (ms) duration. In the production of this device, 10 subgroups of four units are taken at periodic intervals and tested. The results are shown in the following table:
| Subgroup Number | Duration of Automatic Signal (in ms) | |||||||||
| a | b | c | d | |||||||
| 1 | 195 | 201 | 194 | 201 | ||||||
| 2 | 204 | 190 | 199 | 195 | ||||||
| 3 | 195 | 197 | 205 | 201 | ||||||
| 4 | 211 | 198 | 193 | 180 | ||||||
| 5 | 204 | 193 | 197 | 200 | ||||||
| 6 | 200 | 202 | 195 | 200 | ||||||
| 7 | 196 | 198 | 197 | 196 | ||||||
| 8 | 201 | 197 | 206 | 207 | ||||||
| 9 | 200 | 202 | 204 | 192 | ||||||
| 10 | 203 | 201 | 209 | 192 | ||||||
State whether the following statements are True or False. Give reason in support of your answer.
a) If the average number of defects in an item is 4, the upper control limit of the c-chart will be 12.
b) The specification limits and natural tolerance limits are same in statistical quality control.
c) If the probability of making a decision about acceptance or rejection of a lot on the first sample is 0.80 and the sizes of the first and second samples are 10 and 15, respectively, then the average sample number for the double sampling plan will be 25.
d) Two independent components of a system are connected in series configuration. If the reliabilities of these components are 0.1 and 0.30, respectively then the reliability of the system will be 0.65.
e) A point in the pictorial representation of a decision tree having states of nature as immediate sub-branches is known as decision point.
The system shown below is made up of ten components. Components 3, 4 and 5 are not identical and at least one component of this group must be available for system success. Components 8, 9 and 10 are identical and for this particular group it is necessary that two out of the three components functions.
What is the system reliability if R1 = R3 = R5 = R7 = R9 = 0.85 and R2 = R4 = R6 = R8 = R10 = 0.95
A shirt manufacturing company supplies shirts in lots of size 250 to the buyer. A single
sampling plan with n = 20 and c = 1 is being used for the lot inspection. The company and the buyer decide that AQL = 0.04 and LTPD = 0.10. If there are 15 defective in each lot,
compute the
i) probability of accepting the lot.
ii) producer’s risk and consumer’s risk.
iii) average outgoing quality (AOQ), if the rejected lots are screened and all defective shirts are replaced by non-defectives.
iv) average total inspection (ATI).
The failure data of 10 electronic components are shown in the table given below:
| Failure Number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | ||||
| Operating Time (in hours) | 3 | 5 | 31 | 51 | 76 | 116 | 140 | 182 | 250 | 302 | ||||
The failure density function of a random variable T is given by
Calculate, the
i) reliability of the component.
ii) reliability of the component for a 100 hour mission time.
iii) mean time to failure (MTTF).
iv) median of the random variable T.
v) life of the component, if the reliability of 0.96 is desired
Solve the two-person zero-sum game having the following payoff matrix for player A:
| Player B | ||||||
| B1 | B2 | B3 | B4 | B5 | ||
| Player A | A1 | 3 | 4 | 5 | –2 | 3 |
| A2 | 1 | 6 | –3 | 3 | 7 | |