A manufacturer of men’s jeans purchases zippers in lots of 500. The jeans manufacturer uses single-sample acceptance sampling with a sample size of 10 to determine whether to accept the lot. The manufacturer uses c = 2 as the acceptance number. Suppose 3% nonconforming zippers are acceptable to the manufacturer and 8% nonconforming zippers are not acceptable.
Let incoming quality be 4%.
i) Construct an OC curve.
ii) Average outing quality (AOQ), if the rejected lots are screened and all defective zippers are replaced by non-defectives.
iii) Average total inspection (ATI)
Let's solve this numerically step by step. ### Given Data: - Lot Size (N) = 500 - Sample Size (n) = 10 - Acceptance Number (c) = 2 - Incoming Quality (p) = 4% = 0.04 - Acceptable Quality Level (AQL) = 3% = 0.03 - Rejectable Quality Level (RQL) = 8% = 0.08 ### (i) Operating Characteristic (OC) Curve: The OC curve gives the probability of accepting a lot based on different incoming quality levels. The ______ _____ _______ ___ ___ _________.
___ ______ _________ _____ _______ ___ _____ ___ _______ _________.
_________ _________ ______ _________ ________ _______ __________ __________ _________.
__________ ______ __________ ____ _________ ___ ________ __________ ______.
_________ _________ ________ _______ ______.
______ _______ _______ _____ _____ ___ _________ _____ ___ _____.
_____ _____ ____ ___ ________ ______ _____ ________ ___.
_________ ___ ____ ___ ___ ________.
____ ________ ________ ______ ___ __________ __________ ______ ______ ____.
____ _______ ________ ______ ____ ____ _______ __________ _____ ___.
____ ________ _________ _________ _________ _______ ____ ___ _____ _____ _______ ___.
___ _________ _____ _________ ________ _____ ______.
___ _________ _______ ________ ____ __________ ____ ____.
________ ____ _________ _________ ________ _________ ______ __________ _______ ___.
____ _______ ________ __________ ___ _________ ___ __________ _______ ___ _______ _________.
___ ____ _____ _____ ____ _________ ______ ____ _______ _____ ________.
____ _________ __________ _______ ______.
_____ ___ _________ _________ ____ _________ ____ ____ ____ ______ _______ __________.
_________ __________ _____ __________ ____ ____ ___ _______ _____ ___ ____ _________.
_______ ______ __________ ______ _______ ____.
________ _________ ________ _____ ___ __________ _________ ________ ___ ____ ____ ______.
________ ____ ___ ____ _____ ________ __________ ___ _______ _________ ____ _______.
________ ________ __________ ___ ______ ____ ________ _______ ______ _______.
____ ____ _______ ________ ______ _______ __________ ___ _______ __________.
________ ____ __________ _________ ___ _________ _________ __________.
Get Full Answer on WhatsApp
An office supply company ordered a lot of 400 printers. When the lot arrives the company inspector will randomly inspect 12 printers. If more than three printers in the sample are non-conforming, the lot will be rejected. If fewer than two printers are non-conforming, the lot will be accepted. Otherwise, a second sample of size 8 will be taken. Suppose the inspector finds two non-conforming printers in the first sample and two in the second sample. Also AQL and LTPD are 0.05 and 0.10 respectively. Let incoming quality be 4%.
i) What is the probability of accepting the lot at the first sample?
ii) What is the probability of accepting the lot at the second sample?
iii) Find AQL and ATI
A system has seven independent components and reliability block diagram of it shown blow:
Find reliability of the system.
At a call centre, callers have to wait till an operator is ready to take their call. To monitor this process, 5 calls were recorded every hour for the 8-hour working day. The data below shows the waiting time in seconds:
| Time | Sample Number | ||||||||||||
| 1 | 2 | 3 | 4 | 5 | |||||||||
| 9 a.m | 8 | 9 | 15 | 4 | 11 | ||||||||
| 10 | 7 | 10 | 7 | 6 | 8 | ||||||||
| 11 | 11 | 12 | 10 | 9 | 10 | ||||||||
| 12 | 12 | 8 | 6 | 9 | 12 | ||||||||
| 1 p.m. | 11 | 10 | 6 | 14 | 11 | ||||||||
| 2 | 7 | 7 | 10 | 4 | 11 | ||||||||
| 3 | 10 | 7 | 4 | 10 | 10 | ||||||||
| 4 | 8 | 11 | 11 | 11 | 7 | ||||||||
A two-person zero-sum game having the following payoff matrix for player A
| Player B | |||||||||||||||||||
| I | II | III | IV | V | |||||||||||||||
| I | 2 | 4 | 3 | 8 | 4 | ||||||||||||||
| Player A | II | 5 | 6 | 3 | 7 | 8 | |||||||||||||
| III | 6 | 7 | 9 | 8 | 7 | ||||||||||||||
| IV | 4 | 2 | 8 | 4 | 3 | ||||||||||||||
A manufacturer of men’s jeans purchases zippers in lots of 500. The jeans manufacturer uses single-sample acceptance sampling with a sample size of 10 to determine whether to accept the lot. The manufacturer uses c = 2 as the acceptance number. Suppose 3% nonconforming zippers are acceptable to the manufacturer and 8% nonconforming zippers are not acceptable.
Let incoming quality be 4%.
i) Construct an OC curve.
ii) Average outing quality (AOQ), if the rejected lots are screened and all defective zippers are replaced by non-defectives.
iii) Average total inspection (ATI)
Twenty samples each of size 10 were inspected. The number of defectives detected in each of them is given below: 0, 1, 0, 3, 9, 2, 0, 7, 0, 1, 1, 0, 0, 3, 1, 0, 0, 2, 1, 0 Find the control limits for the number of defectives and establish quality standards for the future. Plot the graph and interpret.
State whether the following statements are True or False. Give reason in support of your answer:
(a) Statistical quality control (SQC) is a technique of process control only.
(b) Twenty pieces of different length of cloth contained 2, 4, 1, 3, 5, 4, 2, 7, 3, 5, 2, 2, 4, 5, 6, 4, 2, 1, 2, 4 defects respectively. To check the process is under control with respect to the number of defects, we should use np-chart.
(c) If the probabilities are not associated with the occurrence of different states of nature, then the situation is known as decision making under risk.
(d) In single sampling plan, if we increase acceptance number then the OC curve will be steeper.
(e) A system has four components connected in parallel configuration with reliability 0.2, 0.4, 0.5, 0.8. To improve the reliability of the system most, we have to replace the component which reliability is 0.2.